|
Dynamic Descaler® does not corrode, pit, erode or have any other harmful effects on materials and metals such as; STEEL, IRON, BRASS, COPPER, PLASTIC, FIBER, TEFLON or other metals or materials found in water-based systems or equipment. You can clean your equipment IN-SITU (and sometimes without shutting down the machine).
Simple and Effective
Dynamic Descaler® has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. Because Dynamic Descaler® is free rinsing you do not need to neutralize or pacify the system. The uniqueness of Dynamic Descaler® allows you to clean some equipment while still in
operation utilizing a minimum of your own personnel.
 |
|
Petrochemical Plants
|
Why Use Dynamic Descaler®?
- It is a safe non-toxic, biodegradable chemical to be used on the waterside of heat transfer equipment.
- You do not have to heat Dynamic Descaler®.
- Dynamic Descaler® is safer for the employees to use than other acid products.
- Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
- Cleans down to the original surface without pitting.
- Dynamic Descaler® is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
- Dynamic Descaler® will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
- Removing the scale build up allows your equipment to operate more efficiently with less down time.
Containers
Dynamic Descaler and D-Scale 518 are available in the following containers:
Tankers
275 and 330 gallon totes
30 and 55 gallon drums
5 gallon pails
4 x 1 gallon cases
Dynamic Descaler® Applications
|
